The Infrared Emitter Station (IRX) allows many different components to be controlled on the Vantage system.

Download spec sheet

Signals are sent from the station though emitters to control infrared (IR) devices such as DVD and CD players, stereo receivers, televisions and more.

Keypads, remotes, sensors and more, can be programmed to actuate components connected to the IRX.

When a button is pressed or motion is detected a signal is sent through the Vantage system to the IRX which in turn sends a command to the appropriate device.

Vantage software contains a large library of IR codes to easily facilitate the integration of new products through the IRX. An IR learner is also available to learn and store additional codes.

Key features:

• Transmits signals to IR controllable devices
• Controls multiple products through eight IR outputs
• Uses both Vantage and Xantech emitters
• Tracks the on/off state of equipment through eight contact closure inputs
• Installs easily on the nonpolarized Vantage station bus
• Features LED lights to indicate transmission status and facilitate diagnostics

CONTROLLERS
ENCLOSURES
MODULES
TOUCHSCREENS
SENSORS
SOFTWARE
DIN STATIONS

• BriteStyle Buttons
• HiddenToucH/KH11XG-KH11XB
• Keypad Station/KSXXXX
• Slave Keypad/SLAVE-1-SLAVE-2
• Station and Faceplate Finishes
• Strip Switch Keypad/STRIP-1-STRIP-2
• Contact Input Station/CIS
• 4 Channel Relay Station/STR4RW201
• Infrared Emitter Station/IRX
• Low Voltage Relay Station/LVRS
• Low Voltage Output Station/LVOS
• Power Station/STPSRW201-STPERW201
• RS-232 Station/Q-RS232S
• RS-485 Station/STC4RW001
• TheatrePoint/THEPT-I
• Communicating Thermostat/STAT
• Q-ETS3 Interface Station/Q-ETS3